Launch Special: 20% OFF All Products!

Ends Nov 30, 7:19 PM PHT

Per DTI Fair Trade Permit No. 8442440, Series of 2026

Slides & presentations

Use the four slide channels

Keep the sermon, announcements, lobby loop and timer ready at once. Send a deck to the channel you want, rename channels, and switch off the ones you don't use.

Last checked 3 min read
On this page
  1. The four slide channels
  2. Send a deck to a channel
  3. Rename or switch off a channel

Slides and presentations don't share one queue. ChristChant gives them four independent slide channels, A to D, so the sermon deck can stay ready while the announcements loop runs somewhere else.

Watch: Use the four slide channels (about 1 minute)

The four slide channels

Each slide channel has its own Preview and its own live slide, just like the other channels. Cueing something in one channel never disturbs another. They start with these names:

ChannelStarts out as
ASermons
BAnnouncement
CLobby
DTimer
The four slide channels, each with its own Preview.

The names are only labels. Any slide channel can hold any deck, so use them however your service works. The channel's letter is shown on its tab, so you can tell them apart even after renaming.

Send a deck to a channel

  1. Open the Presentations tab at the bottom of the window and find your deck.
  2. Right-click it and choose Send to followed by the channel's name, such as Send to Sermons.
  3. For a PDF, you can also click the channel letter (A, B, C or D) on its row. The tooltip says which channel it sends to.

The deck opens in that channel's Preview. Check it there, then put it on the screens with Feed & Go Live, as with any other channel.

Check the deck in Preview, then put it on the screens.

Rename or switch off a channel

The quickest way is the Channels button in the header. It opens a board with every channel: what each one holds and whether it's on air, fed or empty. Click the pencil to rename a slide channel, use the switch to turn one off, and drag a channel by its grip to reorder them. The Channels board is part of Premium; on the Free plan the button wears a crown.

You can do the same in Live Console Settings → Channels, on every plan.

  • A renamed channel keeps working exactly as before; only its label changes.
  • Switching a channel off hides it from the channel rail, the switcher, the Send to choices and the Planning chooser.
  • Its loaded content isn't deleted. Switch the channel back on and it returns just as you left it.

You can also rename a channel from its card in Pipeline Flow.

Can one screen show a single channel all service long?

Yes. A screen can follow one channel directly, so a lobby display can show the Lobby channel while the congregation sees the sermon. See Add more screens.

Are Song, Bible and Video channels the same?

They're separate channels too. Song, Bible and Video are core channels: they always run and can't be renamed or switched off. Only the four slide channels can.

Was this helpful?

Your answer helps us improve this guide.