Launch Special: 20% OFF All Products!

Ends Nov 30, 7:19 PM PHT

Per DTI Fair Trade Permit No. 8442440, Series of 2026

Going live

Run timers: countdowns, stopwatches and a clock for the stage

Use the Timers tab to keep the sermon on time, count down to the start of the service, or show the time of day, and decide what happens at zero.

Last checked 3 min read
On this page
  1. Open the Timers tab
  2. Add a timer
  3. Change its settings
  4. Decide what happens at zero
  5. Show it on a screen
  6. See how long things really took

Timers keep a service on schedule. They run in the control window, show on the screens and stage layouts that use them, and carry on if you restart the app.

Watch: Timers for the sermon, the service and the stage (about 2 minutes)

Open the Timers tab

In the panel on the right, click Timers. Two come ready: 1-Hr Service, a countdown the stage screen shows, and Current Time, a clock. You can have up to seven timers.

The selected timer at the top, every timer below it, and New to add one.

Add a timer

  1. Click New and pick a preset: 5 min, 10 min, 15 min, Sermon (30 min), Service (1 hour), Until 10:00, Stopwatch or Clock.
  2. Press play on the big timer. The bar under it shows how much time is left.
  3. Running late? The −1m and +1m buttons take away or add a minute without stopping. The reset button starts it over.

Change its settings

Open the Settings tab (or click the gear on the big timer) to change the selected timer:

SettingWhat it does
NameWhat it is called in the list and on screen.
TypeCountdown, Stopwatch (counts up), Until a time (counts down to a time of day) or Clock (the time of day, in AM/PM or 24-hour).
LengthHow long a countdown runs.
Auto-startStart it by itself at a set time, every day.

Decide what happens at zero

Under Conditions, choose what the timer does when it reaches zero: Pause at 0, Next slide, Show text or Show image (on the congregation's screen, the stage screen or both), Clear text, Black screen, Start timer (start another one) or Overtime, which keeps counting past zero so the speaker can see how far over they are.

  • Turn on Chime to play a soft chime at 00:00.
  • Turn on Colour under As time runs out to change the timer's colour at the times you choose, for example amber with five minutes left and red in the last minute.

Show it on a screen

A timer appears wherever a layout uses it. The stage layouts show the 1-Hr Service timer, so the band and speaker see it as soon as you start it. The Links tab lists every layout and presentation that shows the selected timer. See Set up the stage monitor.

See how long things really took

The Log tab lists every countdown and stopwatch you ran today, with how long each was meant to be and how long it really went.

Was this helpful?

Your answer helps us improve this guide.